How To Effectively Clean The Tub And Shower – A Smarter, Faster Deep Clean (Without the Scrubbing!)

Instructions

1. Pour 1 cup of white vinegar into a microwave-safe container and heat it until it is hot but not boiling (about 1-2 minutes).
2. Carefully pour the heated vinegar into a clean spray bottle.
3. Add 1 cup of blue Dawn dish soap to the spray bottle with the vinegar.
4. Gently swirl or shake the bottle to combine the two liquids thoroughly.
5. Spray the mixture generously all over your tub and shower walls, focusing on areas with heavy soap scum or stains.
6. Let the solution sit for at least 30 to 60 minutes or even longer for extreme buildup.
7. Rinse the surfaces thoroughly with warm water from the showerhead and watch the grime slide right down the drain!

Tips

• For vertical surfaces, apply the mixture heavily so it clings to the walls longer.
• Keep the bathroom ventilated by opening a window or turning on the fan while the mixture sets.
• Use a squeegee after rinsing to prevent new water spots from forming immediately.
• Wear gloves if you have sensitive skin as the concentrated soap and vinegar can be drying.