🪟 Step-by-Step Instructions
1. Clean Your Tub First
Before anything, make sure your bathtub is clean. Rinse away any soap residue or dirt to avoid transferring it onto your bedding.
2. Fill the Tub
Fill your tub with warm water (not too hot, especially for delicate fabrics).
3. Add Detergent
Pour in a small amount of laundry detergent and mix it well into the water. You can also add:
- ½ cup baking soda for odors
- ½ cup vinegar for softness
4. Soak the Bedding
Submerge your bedding completely. Let it soak for 30 minutes to 1 hour.
5. Gently Agitate
Use your hands or feet (yes, it works!) to gently move and press the fabric. This helps remove dirt without damaging the material.
6. Drain and Rinse
Drain the soapy water and refill the tub with clean water. Rinse thoroughly until no soap remains. You may need to repeat this step.
7. Remove Excess Water
Press (don’t wring) the bedding to remove excess water. Wringing can damage fibers.
8. Dry Properly
Hang your bedding outside or over a drying rack. Make sure it’s fully dry to prevent mold or odors.
🌿 Pro Tips
- Wash bedding once every 1–2 weeks
- Use cold water for delicate fabrics like silk or wool
- Avoid overloading the tub—clean one item at a time if needed
- Add a few drops of essential oil for a fresh scent
💤 Final Thoughts
Cleaning your bedding in the bathtub is simple, effective, and surprisingly satisfying. It gives you full control over the process and can even extend the life of your fabrics.
Try it once—you might never go back!
Have you tried washing your bedding this way? Share your experience in the comments below!
