🔧 Step-by-Step Instructions:
1️⃣ Prep the Soak:
Fill the plastic bag about halfway with white vinegar. No need to dilute it—straight vinegar works best for breaking down stubborn mineral deposits.
2️⃣ Attach the Bag:
Carefully lift the vinegar-filled bag and place it over the shower head so that all the holes are fully submerged. Secure it in place using a rubber band or twist tie wrapped tightly around the neck of the shower head.
3️⃣ Let It Work Its Magic:
Let the vinegar soak for 1–2 hours. During this time, the vinegar will dissolve limescale, calcium, and other gunk that’s clogging your shower head.
4️⃣ Scrub It Clean:
Remove the bag (carefully—don’t spill!), then take your old toothbrush and gently scrub the shower head, focusing on the holes. You’ll see how easily the buildup loosens up!
5️⃣ Flush and Test:
Turn on the hot water and let it run for a minute to flush out any remaining debris. You should notice an immediate improvement in water pressure and spray pattern!
🌟 Bonus Tip:
Do this every 2–3 months to keep your shower head clean and water pressure strong—especially if you live in a hard water area.
