Step-by-Step Cleaning Instructions
1. Empty the Drum
Make sure your washer is completely empty before starting the cleaning process.
2. Add White Vinegar to the Drum
Pour 1 cup of white vinegar directly into the washer drum. White vinegar is a natural disinfectant that helps break down mold, mildew, and soap scum.
3. Run a Hot Water Cycle
Set your washer to the hottest water setting and run a full cycle with just the vinegar. This will help dissolve buildup and kill bacteria.
4. Sprinkle Baking Soda Into the Drum
Once the vinegar cycle is complete, sprinkle 1/2 cup of baking soda directly into the drum. Baking soda helps neutralize odors and acts as a gentle abrasive to scrub away any remaining residue.
5. Run Another Hot Cycle
Set your washer to run another full cycle on the hottest setting. The baking soda will help remove any leftover grime and leave your washer smelling fresh.
6. Wipe Down the Rubber Seals and Door
While the cycle runs, use a microfiber cloth dipped in warm soapy water to wipe down the rubber gasket and door. If you notice mold or mildew, use an old toothbrush to scrub the affected areas.
7. Clean the Detergent Drawer
Remove the detergent drawer and soak it in warm soapy water. Use the toothbrush to scrub away any detergent buildup, then rinse and dry before reinserting.
8. Leave the Washer Door Open to Dry
Once you’re finished, leave the washer door slightly open for a few hours to allow proper air circulation. This helps prevent moisture buildup and mold growth.
How to Keep Your Front Load Washer Fresh Between Deep Cleans
✅ Clean Your Washer Once a Month: Performing this deep cleaning routine once a month prevents mold and keeps your washer in top condition. ✅ Use the Right Amount of Detergent: Too much detergent can cause excess residue, so always follow the manufacturer’s guidelines. ✅ Dry the Rubber Gasket After Each Load: Use a dry cloth to wipe the rubber seal after each wash to prevent moisture buildup. ✅ Leave the Door Open After Each Use: Keeping the door slightly open allows air to circulate, reducing the risk of mildew. ✅ Use High-Efficiency (HE) Detergents: Regular detergents can create excessive suds, leading to buildup in front load washers.
FAQs About Cleaning a Front Load Washer
1. How Often Should I Clean My Front Load Washer?
For best results, deep clean your washer once a month. If you notice persistent odors, you may need to clean it more frequently.
2. Can I Use Bleach Instead of Vinegar?
Yes, you can use bleach if you prefer. Replace the vinegar with 1 cup of bleach and follow the same steps. However, vinegar is a safer and more eco-friendly alternative.
3. What If My Washer Still Smells After Cleaning?
If odors persist, check the drain filter (usually located near the bottom of the washer) and remove any trapped debris. Running an additional hot cycle with vinegar can also help eliminate stubborn smells.
4. Is This Method Safe for All Front Load Washers?
Yes! This natural cleaning method is safe for all front load washing machines and won’t damage rubber seals or internal components.
Final Thoughts: Keep Your Washer Clean and Fresh Year-Round
Maintaining a clean front load washer not only eliminates bad odors but also extends the life of your appliance and ensures cleaner laundry. By using simple household ingredients like vinegar and baking soda, you can keep your washer running efficiently without the need for harsh chemicals.
Try this method today and enjoy a fresher, cleaner washing machine!
